Fire Extinguishing Ball Drop System Release Part Drone Automatic Thrower

JMRRC Fire Extinguishing Ball Drop System Release Part Drone Automatic Thrower For Fire Fighting

This fire extinguisher drop system is used with multi rotor drone, which is suitable for rapid extinguishing of outdoor fire in the early stage, and is applied to forest, gas storage tank, grassland and other places.

The dispenser can carry up 4pcs of 1.3kg fire extinguishers at a time. The effective range of a single extinguisher is 3m³ and over 10m³ for a single extinguisher. If the drone is equipped with a zoom camera, it can also drop precisely.

Features:

- Light-weight and sample structure design, using carbon fiber and aluminum alloy structural parts, high reliability, wide working voltage (22-60V), easy to install and use.

- It is suitable for fire extinguishers with rings, and can be used within 152mm in diameter.  This type of fire extinguisher can be filled more quickly, which has lower failure rate and higher reliability.

- Sample structure with light weight. Any drone which can payload 6.5kg weight, all can be used this system.

- The installation and operation are very simple, it can be fixed under the drone by using screws or quick assembly part. Just need to connect the power cord to the power supply (6-14S), and connect a controlling signal cable to the drone remote controller receiver or flight controller output channel. Set a 3-steps switch to control the opening and closing of the drop system.

- Only 1pcs of 3-steps switch for the remote controller is required for controlling the system, which can realize sequential loading and unloading. Reducing the RC and controller channel using.