SHENZHEN GC ELECTRONICS CO.,LTD
Drone & Drone Parts supplier
TFIP10T310x Optical Zoom Camera with Thermal Camera 3 axis Gimbal Intergrated Wireless Video and Control
Note:This device include the ground receive device and controlsoftware. And Video Transmitting distance upto 10KM.
Feature:
Parameters
Power Supply | 3S or 6S(DC12V-26V) |
Power Consumption | About 12W |
Device Size | 150(L)*108(W)*180mm(H) |
Work Condition | -10℃ to +45℃ / 20% to 80% RH |
Storage Condition | -20℃ to +60℃ / 20% to 95% RH |
Function | Aerial photograph |
Weight | 610±20 g |
Working Status | |
Roll angel | -45°~ +135° |
Pitch angel | -120~+120° |
Yaw angel | 360° rotate |
Jitter Angle | Pitch Direction ±0.02°; Horizontal Direction ±0.03° |
Gimbal function | One-click restore to the initial position, support angel and speed control |
Wireless link | Frequency 806MHz-826,default bandwidth 20M (can set 5M,10M) |
Transmitting power &distance | 25dBm 10KM distance |
Transmitter mode | Bidirectional transmission,video and data in one link |
Control mode | IP directly control(UART control option) |
Feature | Ground system PIP display, pseudo color switch, temperature measure |
Visible Light Camera | |
Sensor | 1/3 4M Pixels CMOS sensor |
Zoom | 10x optical zoom, f= 4.9to49 mm ±5% |
AF Time | Support quick auto focus, timelapse< 1 sec |
Video Output | RTSP 1080P 30fps IP output, Local TF record |
FOV | D : WIDE 66.6º±5% TELE 7.2º±5% H : WIDE 53.2º±5% TELE 5.3º±5% V : WIDE 39.8º±5% TELE 4.2º±5% |
Mode | 1080P 30fps |
Infrared Light Camera | |
Resolution | 320*240 pixel |
Pix Spacing | 12μm |
Type | Uncooled Micro Bolometer IR FPA Fabrication |
Wave length | 8~14μm |
NETD | ≤ 65mk@30℃ |
Field Angle | 6.5mm Lens; Angle: 36.4x24.2 |
Measurement | Center point, highest temperature, over-temperature alert |
Warning and Disclaimer:
The TFIP10T3 has been calibrated before leaving the factory.No physical or mechanical modification or adjustment of the gimbal is required or recommended.Do not add any other component or device to the camera.
The TFIP10T3 is a delicate instrument.Do not disassemble the gimbal or camera as this will cause permanent damage.
In order to ensure the safety of flight control system after powering up, we recommend you to remove all the propellers and use non -power-supply for the gimbal. Keep the entire components far from children and flammable & combustible materials!
Because we have no control of the use, mounting, assembly and modification processes, T10X will not assume any legal responsibility for the injury or damage.