SHENZHEN GC ELECTRONICS CO.,LTD
Drone & Drone Parts supplier
Note: If you need to use the radar, then you need to buy a CAN HUB-12 module.
Flight Controller Specification:
Supported Multi : Quadrotor ( + type, X type ), Six Rotor ( + type, IY type, YI type Coaxial double paddle ) , Eight Rotors ( + types, X types, V types )
Supported ESC Type : Below 490Hz PWM ESC
Maximum Output Channel : 8 channels
Recommend remote controller : with SBUS receiver
Supported receiver types : PPM, S-BUS receiver
Support accessories : K-BOX, IOT, RTK, Obstacle avoidance radar, terrain radar, integrated remote controller, FPV camera, flow sensor module .
Working Voltage : 2-12S
Power Consumption : Less than 5W
Working temperature : -10 ~ 60℃
Storage temperature : -25 ~ 60℃
Seismic pressure : <1G
Flight Characteristic :
Hover accuracy : Horizon: ±1.5M Vertical: ±0.5M
Maximum tilt angle : 30 °
Maximum yaw speed : 150°/s
Maximum vertical speed : 6 m/s
Wind resistance : Continuous wind: level 4 Gust: lever 5
Flight mode and function : Alttitude mode, GPS mode, AB point mode, Gorund station, one-key return, out of control continue operation, low voltage protection, fence function, log storage function, landing lock function, no-fly zone function, vibration protection function, star protection function, active noise reduction, motor sequence detection function, direction detection function, dual pump mode, drug break protection function, precision spray, water pump switch control, water pump linkage control.
Hardware Specification :
Weight : Flight controller : 321g
FC: 87g
PMU: 41g
PMU2 (UPS): 44g
Size:
FC: 72.6mm * 48.0mm * 22.8mm
PMU : 53.4mm * 34.4mm * 14.5mm
PMU2 (UPS) : 53.4mm * 34.4mm * 14.5mm
GPS : 62 * 14.3mm
LED : 24 * 24 * 8mm