SHENZHEN GC ELECTRONICS CO.,LTD
Drone & Drone Parts supplier
Features:
1- Using high-performance heat dissipation MOS tube, with strong heat dissipation performance, the working temperature is much lower than normal ESC.
2- The firmware optimized for multi-rotor which has extremely high response speed and more agile control of flight attitude.
3- No need to calibrate the throttle range, auto-adjusting timing, easy to use.
4- Unlimited signal frequency and wide compatibility.
5- Optimized the active deceleration function, with higher reaction speed and drive efficiency, the motor works more smoothly.
6- The output line of ESC LED lamp is constant current 100mA. If connected other types of LED lamp, please pay attention to the current value of LED lamp.
Specification:
Working voltage: 7S-14S
Continuous current: 50A
Transient current: 60A
Weight: 60g
Input cables: AWG16 (cont.30A)
Output cables: AWG16 (cont.30A)
Measurement: 54.4mm*26.5mm*16.2mm
Input cables length: 60cm
LED output: 3.2V 100mA
Protections: throttle signal loss protection, throttle safety protection, under-voltage protection, output short circuit and over-current protection, motor lock-up protection.
Throttle range calibration: unnecessary
Programming: support
Abnormal volt.prot.: <26V or >59V
Throttle post.prot.: support
Signal lost protection: lost thro.2sec.stop
Output SCP: support
Timing: Auto
Other: voluntary speed reduction