SHENZHEN GC ELECTRONICS CO.,LTD
Drone & Drone Parts supplier
3A UBEC
- Product： 3A UBEC
- N.W.： 11.5g
- Parameters
- Product： 3A UBEC
- N.W.： 11.5g
3A UBEC Input 5.5V-26V 2-6S Lipo Output 5V/3A Continuous Max 6A Switch Mode BEC For DIY Drone Multirotor JMRRC
The UBEC is a switch-mode DC regulator separated from ESC (ESC---Electronic Speed Controller for brushless/brushed motor), it will take high-voltage (5.5V to 26V) power from your battery pack and convert it to a consistent safe voltage for your receiver, gyro and servos.
Features:
1.The UBEC is an advanced switching regulator with over-current and over heat protection function, and the maximum efficiency of the system is nearly 90%.
2. The small size and the light weight make it very convenient to use.
3. The comparison of linear BEC and switch-mode BEC: When using a lithium batterypack more than 3S, a switch-mode BEC has much higher efficiency than linear BEC.
4.A shield covers almost all the electronic components on PCB, and a ferrite ring is attached with the output wires to decrease the electromagnetic interference.
Specification:
Output: 5V/3A and 6V/3A switchable
Ripple: ＜50mVp-p(@2A/12V)
Input: 5.5V-26V (2 to 6 cells Lipo battery pack, 5 to 18 cells NiMH battery pack)
Size: 41.6mm*16.6mm*8.5mm (length*width*height)
Weight: 11.5g
Copy product links
Long by picture save/share
INQUIRY
Add Successfully
INQUIRY
Add Successfully
